These optional connection cards provide multiple signal output options for the Sony BRC-300 and BRC-700 camera. Call and talk to your media consultant for more information about these.
|
|
||||
|
|
||||
|
PIXIE Light Pipe IR/232 Emitter
Model: PXE-EMIT-232/IR
This emitter works with the PXE-DCM+
Mfg: SP Controls
PIXIE PRO Control Module for complete system control
Model: PX2-MP-IR
by SP Controls
The PixiePro (PX2-MP-IR) is a modular, infrared-learning audiovisual control system. It ships ready to surface-mount, or fits in a four-gang backbox.
No programming necessary; uses SP Controls' proven Pixie technology to learn and replicate commands for almost any IR-controllable device. PixiePro smartly controls up to eight source devices. Optional modular inserts (included) support IR-controllable devices, including DVD players, lifts, screens, document cameras, switchers, amplifiers, etc.
Ships with one IR emitter for control of a single device. Control of multiple devices requires the purchase of extra emitters (part no. PXE-EMIT).
Optional access-control security is configurable with up to six-digit PINs.
Automated shutdown timer protects expensive projector bulbs.
Illuminated buttons provide audible feedback and can be configured to adjust to ambient lighting conditions; can be programmed with multiple IR codes for macros and other common automation tasks.
Full configurations can be copied ("cloned") between PixiePro units in seconds.
Mfg: SP Controls
PIXIE+ Display control module
Model: PXE-DCM+
For powering display units On and Off remotely via hardwired connection by SP Controls
The Pixie Device Control Module provides a simple, standardized control interface for projectors, monitors, and display devices in a compact single-gang form factor.
A customizable interface with a variety of button modules make the Pixie compatable with nearly any display device available.
Mfg: SP Controls
PIXIE Light Pipe IR emitter (additional)
Model: PXE-EMIT
This emitter ONLY works with the PX2-MP-IR or the IR Only Pixies/p>
Mfg: SP Controls
Lenses
Optional lenses allow for custom projector mounting locations! Short throw lenses get the projector closer to the screen. Long throw lenses allow the projector to be mounted across the room from the screen and not hung from the ceiling!
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
FL-701 Short Throw
Model: FL-701
Mfg:
Dukane 0.8:1 Throw Ratio (Short Throw)
Model: FL-601
Mfg: Dukane
Dukane Long Throw Zoom Lens, 1.7x Zoom
Model: LL-704
Mfg: Dukane
Dukane 2.8-5.2:1 Long throw
Model: LL-805
Mfg: Dukane
Dukane 1.9-3.9:1 Long zoom
Model: LL-603
Mfg: Dukane
Dukane 2.2-2.9:1 Standard throw
Model: SD-804
Mfg: Dukane
Dukane Standard Throw Zoom Lens, 1.5x Zoom
Model: SL-702
Mfg: Dukane
Dukane Middle Throw Zoom Lens, 2.0x Zoom
Model: ML-703
Mfg: Dukane
Dukane 4.3-7.69:1 Long Throw Zoom lens
Model: 487MCZ500
Mfg: Dukane
Dukane 1.8-2.3:1 (Standard Throw)
Model: SD-800
Mfg:
Dukane 1.2-2.0:1 (Short Zoom)
Model: SL-602
Mfg: Dukane
Dukane 0.5-0.6:1 Ultra short throw
Model: USL-801
Mfg: Dukane
Dukane 1.2-1.5:1 Short throw
Model: SL-802
Mfg: Dukane
Dukane 1.5-2.2:1 Short throw
Model: SL-803
Mfg: Dukane
Dukane Ultra Long Throw Zoom Lens
Model: UL-705
Mfg: Dukane
Dukane 3.9-7.4:1 Super Long zoom
Model: UL-604
Mfg: Dukane
Dukane 5.0-9.2:1 Long throw
Model: UL-806
Mfg: Dukane
Lamps
Replacement lamps for many Dukane Projectors
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
Dukane LAMP ImagePro 8105H
Model: 456-8105H
Mfg: Dukane
Dukane LAMP ImagePro 8930
Model: 456-8755N
Mfg: Dukane
Dukane LAMP ImagePro 9137WU-RJ
Model: 456-8949H
Mfg: Dukane
Dukane LAMP ImagePro 8971
Model: 456-8971
Mfg: Dukane
Dukane LAMP ImagePro 8970
Model: 456-8970
Mfg: Dukane
Dukane LAMP ImagePro 8959H-RJ
Model: 456-8958H-RJ
Mfg: Dukane
Dukane LAMP ImagePro 8958H-RJ
Model: 456-8958H-RJ
Mfg: Dukane
Dukane LAMP ImagePro 8957HW-RJ
Model: 456-8958H-RJ
Mfg: Dukane
Dukane LAMP Imagepro 8943A
Model: 8943A
Mfg: Dukane
