Screens

Model: 40547

Mfg: Da-Lite

Model: 76742

Mfg: Da-Lite

Model: 76745

Mfg: Da-Lite

Model: 40543

• Permanent Wall Mounting
• Non-Tensioned
• Front Projection
• 100" Diagonal
• Video Format
• 4:3 Aspect Ratio
• DA-Mat Finish

Mfg: Da-Lite

Model: DUKVW84x63

Mfg: Dukane

Model: 74653

Manual Wall / Ceiling Screen, Video Format, Matte White

• Perfect for classroom and meeting room facilities.
• Easy pull-down system locks at intervals to fit a variety of projection formats.
• Nylon bearings provide smooth quiet operation for the life of the screen.
• Case design allows for hanging from a ceiling or flush mounting to a wall.
• Matte White, High Contrast Matte White and Video Spectra 1.5 fabrics will be seamless in all sizes.
• High Power fabric up to and including 6' high will be seamless.

Mfg: Da-Lite

Model: 77169

Manual Wall / Ceiling Screen, Video Format, Matte White

• Ideal for large size conference or training rooms.
• Permanently lubricated steel ball bearings combined with nylon bushings and heavy-duty spring assembly offers smooth operation even in demanding applications.
• Optional Floating Mounting Brackets allow the Model C to be mounted onto wall or ceiling studs and aligned left or right after installation by releasing two sets of screws.
• Matte White fabric up to and including 10' high will be seamless.

Mfg: Da-Lite

Model: 77290

Manual Wall / Ceiling Screen, Video Format, Matte White

• Ideal for large size conference or training rooms.
• Permanently lubricated steel ball bearings combined with nylon bushings and heavy-duty spring assembly offers smooth operation even in demanding applications.
• Optional Floating Mounting Brackets allow the Model C to be mounted onto wall or ceiling studs and aligned left or right after installation by releasing two sets of screws.
• Matte White fabric up to and including 10' high will be seamless.

Mfg: Da-Lite

Model: DUKVT200

Mfg: Dukane

Model: 40149

Black case, video format with Keystone Eliminator

• The Picture King is a high quality professional tripod screen able to withstand daily usage.
• Heavy duty aluminum extruded legs with toe release mechanism offers a wide stance for maximum stability.
• Screen height is adjustable to accommodate any ceiling height with self-locking extension tube and high-low case adjustment.
• Built-in fabric lock secures screen fabric during transport and use to prevent shifting.

Mfg: Da-Lite

Model: 40782

Matte White, motorized screen, White Case

Single motor screen, for control please select one of the single motor low voltage control packages available in the Da-Lite Screen Options section.

Mfg: Da-Lite

Model: 40789

Single motor screen, for control please select one of the single motor low voltage control packages available in the Da-Lite Screen Options section.

Mfg: Da-Lite

Model: 76738

Single motor screen, for control please select one of the single motor low voltage control packages available in the Da-Lite Screen Options section.

Mfg: Da-Lite

Model: 76740

Single motor screen, for control please select one of the single motor low voltage control packages available in the Da-Lite Screen Options section.

Mfg: Da-Lite

Model: 89746

Single motor screen, for control please select one of the single motor low voltage control packages available in the Da-Lite Screen Options section.

Mfg: Da-Lite

Model: 89746L

Single motor screen with built in LVC, for control the Da-Lite Wireless RF remote control transmitter and receiver is recommended.

Mfg: Da-Lite

Model: 89750

Single motor screen, for control please select one of the single motor low voltage control packages available in the Da-Lite Screen Options section.

Mfg: Da-Lite

Model: 89750L

Single motor screen with built in LVC, for control the Da-Lite Wireless RF remote control transmitter and receiver is recommended.

Mfg: Da-Lite

Model: 88376

Single motor screen, for control please select one of the single motor low voltage control packages available in the Da-Lite Screen Options section.

Mfg: Da-Lite

Model: 88376R

Mfg: Da-Lite

Model: 88380

Single motor screen, for control please select one of the single motor low voltage control packages available in the Da-Lite Screen Options section.

Mfg: Da-Lite

Model: 88380L

Single motor screen with built in LVC, for control the Da-Lite Wireless RF remote control transmitter and receiver is recommended.

Mfg: Da-Lite

Model: 88380R

Mfg: Da-Lite

Model: VMAX150UWV2

Elite 150" 4:3 Electric Screen

The Elite Screens come standard with grounded electrical outlet for easy "plug&play". Additionally, the VMAX2 screens come with RF remote, IR remote and wall switch options STANDARD. As such, when you purchase an Elite VMAX2 you have a screen that is both easy to install and comprehensive in control options - at no additional cost! (resulting in hundreds of dollars in savings)

Mfg: Elite Screens

Model: VMAX150XWV2

Elite 150" 4:3 Electric Screen

The Elite Screens come standard with grounded electrical outlet for easy "plug&play". Additionally, the VMAX2 screens come with RF remote, IR remote and wall switch options STANDARD. As such, when you purchase an Elite VMAX2 you have a screen that is both easy to install and comprehensive in control options - at no additional cost! (resulting in hundreds of dollars in savings)

Mfg: Elite Screens

Model: 77027

Mfg: Da-Lite

Model: 77028

Mfg:

Model: 82433

Electrical rating 115 VAC 60 Hz 5A. The single motor LVC is used to operate Da-Lite single motor electric screens from one or more locations, remote control, or for integration into a control panel system. Operated by a 3-button momentary, dry contact switch. Any combination of single or multiple 3-button switches, optional radio frequency remote or infrared remote, or a control panel with momentary dry contacts may control the LVC. Control board to be mounted in a galvanized steel housing measuring 21/4" H x 41/2" W x 101/2" L. Standard knockouts provided on housing for 1/2" conduit connections.

NOTE: This control cannot be used with the Horizon Electrol®, Ascender® Electrol®, Dual Masking Electrol® or Motorized Scenic Roller screens.

Consists of the Single Motor Low Voltage Control System, a 3/4 channel radio transmitter and radio receiver. Three buttons on the transmitter allow you to move the screen up or down and to stop it at any position.

• Typical range is 75'
• Radio receiver plugs right into the LVC unit.

Mfg: Da-Lite

Model: 82435

SUGGESTED SPECIFICATIONS: Electrical rating 115 VAC 60 Hz 10A. The dual motor LVC is used to operate the Da-Lite Dual Masking Electrol® Screens, remote control, or for integration into a control panel system. Operated by a 3-button momentary dry contact switch. Connections, including 115 volt input, switch input and motor output, to control board provided by screw terminal blocks. Any combination of single or multiple 3-button switches, optional radio frequency remote or infrared remote, or a control panel with momentary dry contacts may control unit. Control board to be mounted in a steel housing measuring 4" H x 6" W x 8" L. Standard knockouts provided on housing for conduit connections.

NOTE: This control cannot be used with the Horizon Electrol®, Ascender® Electrol®, or Motorized Scenic Roller screens.

The Radio Frequency Remote Control Da-Lite part number 82435, consists of the Dual Motor Low Voltage Control System, a 3/4 channel radio transmitter and radio receiver. Three buttons on the transmitter allow you to move the screen up or down and to stop it at any position.

• Typical range is 75'
• Radio receiver plugs right into the DMC unit.

Mfg:

Model: 40973

The LVC consists of a printed circuit board with the microcomputer, relays and a transformer. The control components are housed in a metal electrical box. It is possible to control the screen from any number of 3-button switches, or computer controls. An infrared remote and a radio frequency remote can be added as control options. The low voltage 3-button switch utilizes 12 volts DC to control the motorized screen. The LVC is designed to UL, CSA and National Electrical Code standards. The overall housing size is: 4" x 6" x 2 1/2".

SUGGESTED SPECIFICATIONS: Electrical rating 115 VAC 60 Hz 5A. The single motor LVC is used to operate Da-Lite single motor electric screens from one or more locations, remote control, or for integration into a control panel system. Operated by a 3-button momentary, dry contact switch. Any combination of single or multiple 3-button switches, optional radio frequency remote or infrared remote, or a control panel with momentary dry contacts may control the LVC. Control board to be mounted in a galvanized steel housing measuring 21/4" H x 41/2" W x 101/2" L. Standard knockouts provided on housing for 1/2" conduit connections. Control to be listed by Underwriter's Laboratories.

NOTE: This control cannot be used with the Horizon Electrol®, Ascender® Electrol®, Dual Masking Electrol® or Motorized Scenic Roller screens.

Mfg: Da-Lite

Model: 78145

The Dual Motor Controller System consists of a printed circuit board with the microcomputer, relays and a transformer. The control components are housed in a metal electrical box. It is possible to control the screen from any number of 3-button switches, or computer controls. An infrared remote and a radio frequency remote can be added as control options. The low voltage 3-button switch utilizes 12 volts DC to operate the standards. The overall housing size is: 4 1/4" x 6" x 8 1/4".

SUGGESTED SPECIFICATIONS: Electrical rating 115 VAC 60 Hz 10A. The dual motor LVC is used to operate the Da-Lite Dual Masking Electrol® Screen, remote control, or for integration into a control panel system. Operated by a 3-button momentary dry contact switch. Connections, including 115 volt input, switch input and motor output, to control board provided by screw terminal blocks. Any combination of single or multiple 3-button switches, optional radio frequency remote or infrared remote, or a control panel with momentary dry contacts may control unit. Control board to be mounted in a steel housing measuring 4" H x 6" W x 8" L. Standard knockouts provided on housing for conduit connections. Control to be listed by Underwriter's Laboratories.

NOTE: This control cannot be used with the Horizon Electrol®, Ascender® Electrol®, or Motorized Scenic Roller screens.

Mfg: Da-Lite

Model: SCB-100

SUGGESTED SPECIFICATIONS: The Serial Control Board SCB-100 allows for control over a screen using RS-232C communication and/or relay closures. Can be used to control most 100VAC-240VAC screens or projector lift. Electrical requirements are 100-240VAC 50-60HZ 10 Amp.

I/O ports include 2 motor connections to operate 1 or 2 single motor screens, a screen and projector lift or a masking screen with 2 motors. Connections provided by 6" wire leads. Two RS-232 ports for connection to the optional Da-Lite NET-100 Ethernet-Serial Adaptor and/or a third party control system. Ports 1 and 2 can control either motor 1 or 2. Connections provided by captive screw terminals. Two dry contact closure (no voltage input) ports for connection of multiple low voltage wall switches or a third party control device with dry contact closure. Port 1 controls motor 1 only, port 2 controls motor 2 only. Connections provided by captive screw terminals. One 12VDC output for supply to the optional Da-Lite NET-100 Ethernet-Serial Adaptor. Connections provided by captive screw terminals. 6" wire leads provided for 100VAC-240VAC input.

The outer housing is made of galvanized steel with a removable cover for easy access to connections. The housing base includes four 7⁄8" diameter knockouts for connection of 1⁄2" conduit and screw mounting holes to secure the SCB-100 to most surfaces. The SCB-100 can be built-in to the Contour®, Advantage®, and Advantage® Deluxe series screens. This will add an additional 33⁄4" to the Contour®, and 10" to the Advantage® screen case. The Advantage® Deluxe case length does not change.

Note: The SCB-100 cannot be used to control the Da-Lite Horizon, Tensioned Horizon, Ascender® and Motorized Scenic Roller screens. Unit to be listed by Underwriters’ Laboratories.

Mfg: Da-Lite

Model: 98662

• Typical range is 75'
• Radio receiver plugs right into the LVC unit

Mfg: Da-Lite

Model: 96382

Mfg: Da-Lite

Model: 96383

Mfg: Da-Lite

Model: 96384

Mfg: Da-Lite